1. Imported weather-resistant ABS is used for injection molding, which is firm and beautiful and is not easy to change color.
2. Panel dark display
3. 0.45mm thick copper tube high density hydrophilic aluminum foil evaporator increases the conversion of cold water.
4. Unique and accurate design of the cold air prevention electric control system. When the water temperature is lower than 35℃, the fan will not start.
5. Unique high-temperature protection function. When the water temperature is higher than 70℃ in the energized state, the forced heat dissipation function will be automatically turned on.
6. The 26 degree "environmental protection" function is beneficial to energy conservation and environmental protection. It is the best summer room temperature for human comfort. The remote control can be realized by pressing the special "one-touch" button.
7. C-shaped large-area evaporator, DN15 interface, multi-inlet and multi-outlet short waterway design, the water resistance of each group of pipelines is the same, the inside and outside of the evaporator are degreased and degreased without any peculiar smell, thus ensuring the heat exchange efficiency of the whole machine.
8. The original drawing type convenient filter screen is easy to clean and disassemble, saving time and labor, and the dust removal operation is simpler.