News Center

Attention to Installation and Wiring of Fan Coil Unit Controller

Views : 1636
Update time : 2020-03-17 11:32:11
Two Problems in Installing and Wiring Fan Coil Unit Temperature Controllers:

First: First of all, we need to know what equipment the LCD fan coil unit  thermostat should control.

Second: find out how many wires these devices need to connect to and where each wire is connected.  Of course, the fan coil unit LCD temperature controller that normally controls the is mainly made of 7 wires (4 wires need to be connected from the terminal of the fan coil unit, which are respectively high, medium, low and zero wires, plus the three wires of the electric valve installed on the fan coil unit are respectively the valve opening wire, the valve closing wire and the zero wire.  These seven wires correspond to the terminals of the fan coil unit LCD temperature controller respectively).  In addition, the hot wire and the zero wire introduced by the fan coil unit LCD temperature controller will depend on where we connect the two wires. We can control them freely as long as 220V power supply is connected.

There is also a fan coil unit LCD temperature controller, which is the floor heating temperature controller. The  LCD temperature controller is used to control floor heating equipment such as electric blankets, geothermal films and other floor heating products. The fan coil unit temperature controller is 6-wire, which is respectively connected with two control lines of floor heating equipment, external sensors and power lines.

Well, the above is a brief introduction to the installation method of fan coil unit thermostat and the matters needing attention. I wonder if you have mastered it?  In fact, when we install the fan coil unit thermostat, the location is very important, we should avoid the power supply, and do not place it in the place where humidity and direct sunlight will be most appropriate.  At the same time, it will not interfere with the placement of other things, so when we start to install the fan coil thermostat, we must find a good place to start!
Related News
Read More >>
Water source rooftop chiller unit part in HAVC Water source rooftop chiller unit part in HAVC
Mar .22.2024
The fan coil unit is a common HVAC system terminal device. It can be used independently or in conjunction with other equipment to provide more efficient cooling and heating services. One such example is the water-source chiller.
The quietness and efficiency of Guqin series Horizontal Ultra-Thin Concealed fan coil units The quietness and efficiency of Guqin series Horizontal Ultra-Thin Concealed fan coil units
Mar .22.2024
The Guqin Series Vertical and Horizontal Ultra-Thin Concealed Fan Coil Unit is a HVAC terminal component product produced by Yesncer, named after the world’s intangible cultural heritage – the Guqin. Not only does it have an exquisite appearance, but its
Ultra-low temperature air source heat pump principle and core technology Ultra-low temperature air source heat pump principle and core technology
Dec .27.2023
The principle of ultra-low temperature heat pump system is as follows.
Fan Coil Unit Selection And Product Advantages Fan Coil Unit Selection And Product Advantages
Dec .07.2023
Fan Coil Unit Selection And Product Advantages
This website uses cookies
We use essential cookies to make our site work. With your consent,we may also use non-essential cookies to improve user experience and analyze website traffic. By clicking "Yes",you agree to our website's cookies use as described in our "Privacy Statement".